Altman Lighting to demonstrate innovative architectural solutions at L | Double Heads Tube Tilt Adjustable 7w Cob Led Downlight

If the rubber seal falls into the engine compartment, it may contact parts of the engine or exhaust system, increasing the risk of a fire.

IP66 means the product is completely dust-tight as well as protected against high pressure water jets from any direction.

MBUSA will notify owners, and dealers will replace the rubber seal, in the engine compartment, free of charge. The manufacturer has not yet provided a notification schedule.

Consumers should immediately stop using all recalled bed handles that were sold without safety retention straps, and contact Bed Handles, Inc. for free safety retention straps to secure the bed handle to the bed frame, new assembly and installation instructions for models BA10W, BA11W and AJ1 and a warning label to attach to the bed handles.

- IOTA(R) PoE-CP12 Power-over-Ethernet Emergency LED Driver – delivers 12W constant power emergency illumination to POE/IoT enabled luminaires.

WAC Lighting’s new LED line is IC-rated, airtight and suitable for both interior and exterior environments. Dimming options include TRIAC, electronic low voltage and 0-10V dimmers on universal 120-277 volt systems. The Oculux Dim-to-Warm function combines high performance LED with pure white 3000K light at a 95+ CRI and 1800K incandescent light with warm glow suitable for a dimmed ambiance.

The exact situation is as follows. The Energy Star program sets a range of photometric requirements in terms of efficacy and lumen output for specific product types such as downlights, accent lights, portable desk lamps, and many more categories. To gain Energy Star status, a lighting product must meet those minimum requirements along with other elements of the program. Lighting manufacturers have two options in terms of proving photometric compliance. One is based on an accredited LM-80 report and TM-21 projections on the LEDs used in the product. That data is generally readily available to lighting manufacturers that buy packaged LEDs from major vendors. The LED manufacturers perform the minimum of 6000 hours of testing as part of the process of bringing new products to market and there are provisions for shorter testing periods for manufacturers that develop a next-generation LED using the same basic architecture as a prior product.

The trigger spray assembly can be removed from the De-Icer and Frost Shield container. The product contains methanol and ethylene glycol. Children may gain access to the product by removing the trigger assembly, posing a risk of poisoning.

Scott Donoghue: It is essential that both extract and supply fans are operated by a common on/off switch to ensure the correct air balance is maintained. Where the calculated extract flow rate is above 2.50metre3/s, consideration should be given to incorporating a demand controlled ventilation system (DCKV) for both cost and energy saving purposes.

Among the best interior products included in BD+C’s Top 101 Products report are Armstrong Ceiling Solutions…

Zumtobel was the other major presence in the Festhalle. That company has not fared well of late and recently underwent an upheaval in top management (https://bit.ly/2HyUPmd). It’s hard to know how the recent business downturn impacted the company’s L+B presence. But the minimalistic and dimly-lit exhibit area was unlike its bold presence at past events. The exhibit area did have some advanced lighting application vignettes. And the focus seemed to be on the services business unit rather than the lighting brands.

Recessed LED lighting collection comes in five dome choices, ranging from Dune, which creates concentric rings of reflected light reminiscent of rippling water, to Torus, which uses 3D geometry for a subtle play of light and shadow. Two ceiling appearance options: flanged, for a traditional appearance, and flangeless, for a smooth, mudded–in ceiling appearance.